LPF-90D-15

MEAN WELL
AC/DC драйвер LED
развернуть ▼ свернуть ▲
Фотография серии LPF-90D
Чертеж серии LPF-90D
 
 

Технические характеристики

показать свернуть
Тип преобразователя
Мощность выходная
Диапазон выходных напряжений
Диапазон выходных токов
Напряжение сети/входное номинальное
Режим стабилизации
Тип диммирования ШИМ, 0/1-10 В, потенциометр внешний
Исполнение конструктивное
Степень защиты (IP)
Подстройка выходных параметров
Диапазон входных напряжений (AC)
Диапазон входных напряжений (DC)
Напряжение изоляции вход-выход
Количество выходов
Коэффициент мощности
Эффективность
Функция защиты КЗ, перегрузка, перенапряжение, перегрев
Температура рабочая
Размер 161×61×36 мм
Применение
Особенности
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
LPF-90D 90W Constant Current Mode LED Driver series User’s Manual 110 M M SELV IP67 (CCC optional) ■ Features Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit IP67 rating for indoor or outdoor installations Function: 3 in 1 dimming Typical lifetime>50000 hours 5 years warranty Type HL ■ Applications LED panel lighting LED downlight LED decorative lighting LED tunnel lighting Moving sign Type “HL” for use in Class I, Division 2 hazardous (Classified) location. ■ Description LPF-90D series is a 90W AC/DC LED driver featuring the constant current output. LPF-90D operates from 90～305VAC and offers models with different rated voltage ranging between 15V and 54V. Thanks to the high efficiency up to 90.5%, with the fanless design, the entire series is able to operate for -40 ℃ ~ +70 ℃ case temperature under free air convection. The entire series is rated with IP67 ingress protection level and is suitable to work for a variety of applications at dry, damp or wet locations. LPF-90D is equipped with the 3 in 1 dimming function so as to provide the design flexibility for LED lighting system. ■ Model Encoding LPF - 90D - 24 Rated output voltage(15V/20V/24V/30V/36V/42V/48V/54V) Rated wattage Series name File Name:LPF-90D-SPEC 2021-09-03 PDF
Документация на LPF-90D-54 

LPF-90D.cdr

Дата модификации: 03.09.2021

Размер: 148.5 Кб

8 стр.

LPF-90D 90W Single Output Switching Power Supply series Features : Universal AC input / Full range (up to 305VAC) Built-in active PFC function High efficiency up to 90.5% Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Fully isolated plastic case Fully encapsulated with IP67 level (Note.6) Class power unit, no FG Built-in 3 in 1 dimming function (1~10Vdc or PWM signal or resistance) Suitable for LED lighting and moving sign applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet locations 3 years warranty F 110 M M SELV SPECIFICATION MODEL DC VOLTAGE LPF-90D-15 LPF-90D-20 LPF-90D-24 LPF-90D-30 15V 20V 24V 30V 36V 42V 48V 54V 12 ~ 20V 14.4 ~ 24V 21.6 ~ 36V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V CONSTANT CURRENT REGION Note.4 9 ~ 15V OUTPUT 4.5A 3.75A 2.5A 2.15A 1.88A 1.67A 75W 90W 90W 90W 90W 90.3W 90.24W 90.18W 150mVp-p 150mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p RIPPLE & NOISE (max.) Note.2 150mVp-p VOLTAGE TOLERANCE Note.3 4.0% 4.0% 4.0% 4.0% LINE REGULATION 0.5% 0.5% 0.5% LOAD REGULATION 1.5% 1.0% 0.5% Note.7 2000ms, 200ms at 95% load 16ms/230VAC Note.5 90 ~ 305VAC 4.0% 0.5% 4.0% 4.0% 0.5% 4.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 230VAC / 115VAC 16ms/115VAC at full load 127 ~ 431VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.97/115VAC, PF>0.96/230VAC, PF>0.95/277VAC at full load (Please refer to "Power Factor Characteristic" curve) EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.) 89.5% 89% 90% 0.95A / 115VAC 0.5A / 230VAC COLD START 70A/230VAC LEAKAGE CURRENT <0.75mA / 277VAC Note.4 PROTECTION OVER VOLTAGE 90.5% 90.5% 90.5% 90.5% 54 ~ 60V 59 ~ 65V 95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed 47 ~ 53V 34 ~ 38V 18 ~ 21V 28 ~ 34V 41 ~ 46V 23 ~ 27V Protection type : Shut down o/p voltage, re-power on to recover 90 10 (RTH2) Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. -40 ~ +70 VIBRATION 90.5% 0.4A / 277VAC OVER TEMPERATURE WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT (Refer to "Derating Curve") 20 ~ 95% RH non-condensing -40 ~ +80 0.03%/ , 10 ~ 95% RH (0 ~ 50 ) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750, EN61347-1, EN61347-2-13 independent, IP67 approved ; Design refer to UL60950-1, TUV EN60950-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55015, EN61000-3-2 Class C ( 60% load) ; EN61000-3-3 EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING NOTE LPF-90D-54 5A OVER CURRENT OTHERS LPF-90D-48 RATED POWER VOLTAGE RANGE EMC LPF-90D-42 RATED CURRENT HOLD UP TIME (Typ.) SAFETY & LPF-90D-36 18 ~ 30V 3A SETUP, RISE TIME INPUT IP67 Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level(surge 2KV), criteria A 267.2Khrs min. MIL-HDBK-217F (25 ) 161*61*36mm (L*W*H) 0.7Kg; 20pcs/15Kg/0.73CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Constant current operation region is within 60% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 5. Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minutes. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 9. Please do not use with LED driver. File Name:LPF-90D-SPEC 2011-06-28 PDF
Документация на серию LPF-90D 

LPF-90D.cdr

Дата модификации: 29.06.2011

Размер: 244.4 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    APC-12-350 (MW)