RS-35-12

AC/DC преобразователь: в кожухе; 35 Вт; выход 12В @ 3А; вход: 88...264VAC / 125...373VDC; -20...70°C
развернуть ▼ свернуть ▲
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Возможности
Типы защиты КЗ, перегрузка, перенапряжение
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
КПД
Шум
Размер 99×82×35 мм
Рабочая температура
Примечание AC-DC Regulated Power Supply Module, 1 Output, 36W, Hybrid
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 9

показать свернуть
Тип Наименование Корпус Упаковка i P вых Выход U1 I1 Стабилизация Вход Конструктив Возможности Защита Выходов Управление IP U вх AC U вх DC Коэф. мощн. U изол вх-вых U изол вх-земля U изол вых-земля Применение КПД Шум T раб Примечание Карточка
товара
P+ LRS-35-12 (MW)
 
в коробках 60 шт КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module, 1 Output, 36W, Hybrid
P+ LRS-50-12 (MW)
 
в коробках 60 шт КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module, 1 Output, 50.4W, Hybrid
F~ LM35-22B12 (MORNSUN)
 
1 шт КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module, 1 Output, 36W, Hybrid
F~ LM35-23B12R2 (MORNSUN)
 
в коробках 20 шт КЗ, перегрузка, перенапряжение
A+ LM35-23B12 (MORNSUN)
 
1 шт КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module
A+ PVA40-26B12 (MORNSUN)
 
input КЗ, перегрузка, перегрузка AC-DC Regulated Power Supply Module
A+ EPS-45-12-C (MW)
 
1 шт компактный дизайн, базовая модель КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module, 1 Output, 45W, Hybrid
A+ LM35-20B12 (MORNSUN)
 
1 шт КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module
A+ NK35-12 (PAIRUI)
 
 

Файлы 2

показать свернуть
RS-35 35W Single Output Switching Power Supply ■ Features : Universal AC input / Full range Protections: Short circuit / Over load / Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test No load power consumption<0.5W All using 105℃ long life electrolytic capacitors Withstand 300VAC surge input for 5 second High operating temperature up to 70℃ Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty series User’s Manual Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION AS/NZS62368-1 MODEL OUTPUT INPUT UL62368-1 RS-35-3.3 RS-35-5 RS-35-12 RS-35-15 RS-35-24 RS-35-48 3.3V 5V 12V 15V 24V 48V RATED CURRENT 7A 7A 3A 2.4A 1.5A 0.8A CURRENT RANGE 0 ~ 7A 0 ~ 7A 0 ~ 3A 0 ~ 2.4A 0 ~ 1.5A 0 ~ 0.8A RATED POWER 23.1W 35W 36W 36W 36W 38.4W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 120mVp-p 120mVp-p 200mVp-p VOLTAGE ADJ. RANGE 2.9V ~ 3.6V VOLTAGE TOLERANCE Note.3 ±3.0% 4.5 ~ 5.5V ±2.0% 10.8 ~ 13.2V ±1.0% 13.5 ~ 16.5V ±1.0% 22 ~ 27.6V ±1.0% 42 ~ 54V ±1.0% LINE REGULATION Note.4 ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION Note.5 ±2.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% 88% 88.5% 27.6 ~ 32.4V 55.2 ~ 64.8V SETUP, RISE TIME 500ms, 50ms/230VAC HOLD UP TIME (Typ.) 80ms/230VAC VOLTAGE RANGE 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 76.5% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.8A/115VAC 0.55A/230VAC COLD START 36A/230VAC OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. 1200ms, 50ms/115VAC at full load 15ms/115VAC at full load 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) 80.5% 84.5% 86% <2mA / 240VAC 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +70℃ (Refer to "Derating Curve") WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 20 ~ 90% RH non-condensing VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC (Note 6) EMC EMISSION 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368-1, AS/NZS 62368.1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC EMC IMMUNITY MTBF DIMENSION PACKING NOTE TPTC004 DC VOLTAGE LEAKAGE CURRENT OTHERS BS EN/EN62368-1 IEC62368-1 -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level, criteria A, EAC TP TC 020 249Khrs min. MIL-HDBK-217F (25℃) 99*82*36mm (L*W*H) 0.3Kg; 45pcs/14Kg/0.76CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer:For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:RS-35-SPEC 2021-09-15 PDF
Документация на RS-35-5 

RS-35-20210915.cdr

Дата модификации: 28.09.2021

Размер: 120.4 Кб

2 стр.

RS-35 35W Single Output Switching Power Supply series Features : Universal AC input / Full range Protections:Short circuit/Over load/Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test All using 105 long life electrolytic capacitors Withstand 300VAC surge input for 5 second High operating temperature up to 70 Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty SPECIFICATION MODEL OUTPUT INPUT RS-35-3.3 RS-35-5 RS-35-12 RS-35-15 RS-35-24 RS-35-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 7A 7A 3A 2.4A 1.5A 0.8A CURRENT RANGE 0 ~ 7A 0 ~ 7A 0 ~ 3A 0 ~ 2.4A 0 ~ 1.5A 0 ~ 0.8A RATED POWER 23.1W 38.4W 35W 36W 36W 36W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 120mVp-p 120mVp-p 200mVp-p VOLTAGE ADJ. RANGE 4.5 ~ 5.5V 2.0% 10.8 ~ 13.2V 1.0% 13.5 ~ 16.5V 1.0% 22 ~ 27.6V 1.0% 42 ~ 54V 1.0% 2.9V ~ 3.6V VOLTAGE TOLERANCE Note.3 3.0% LINE REGULATION Note.4 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION Note.5 2.0% 1.0% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load HOLD TIME (Typ.) 80ms/230VAC VOLTAGE RANGE 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 73% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.8A/115VAC 0.55A/230VAC COLD START 36A/230VAC LEAKAGE CURRENT <2mA / 240VAC 15ms/115VAC at full load 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) 77% 81% 83% 84% 84% 27.6 ~ 32.4V 55.2 ~ 64.8V 110 ~ 150% rated output power OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMC (Note 6) HARMONIC CURRENT Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2) heavy industry level, criteria A EMS IMMUNITY MTBF 249Khrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION PACKING NOTE 99*82*36mm (L*W*H) 0.3Kg; 45pcs/14Kg/0.83CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:RS-35-SPEC 2006-04-12 PDF
Документация на серию RS-35 

RS-35.cdr

Дата модификации: 21.04.2006

Размер: 367.2 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.