16SVF560M

Конденсатор алюминиевый 16 В x 560 мкФ ±20%, SMD, -55...125 °C, 1000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 8×8×8.3 мм
Примечание High Voltage, Temp and Capacitance
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P- 16SVT560M (PAN)
 
400 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 16V, 20% +Tol, 20% -Tol, 560uF, Surface Mount, 3333
A+ EEEFT1E561UP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 560uF, Surface Mount, 3333
A+ 16SVPF560M (PAN)
 
в ленте 400 шт High Voltage / Large capacitance
A+ 20SVPT560M (PAN)
 
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 20V, 20% +Tol, 20% -Tol, 560uF, Surface Mount, 4141
A+ EEEFPE561UAL (PAN)
 
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 560uF, Surface Mount, 4141
A+ 20SVT560M (PAN)
 
400 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 20V, 20% +Tol, 20% -Tol, 560uF, Surface Mount, 4141
A+ EEEFPE561UAP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 560uF, Surface Mount, 4141
A+ EEEFPE561UAV (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 560uF, Surface Mount, 4141
A+ EEEFN1C561UL (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 560uF, Surface Mount, 3333
A+ EEEFN1C561UV (PAN)
 
500 шт V-FN, Vibration proof, 16V, 560uF, 105°C, 2000h, 8x10.2mm, ripple 600mArms, 0.16Ohm
A+ EEH-ZK1E561UP (PAN)
 
50 шт
 
A+ EEH-ZK1E561UV (PAN)
 
 
A+ EEEFN1C561UP (PAN)
 
в ленте 500 шт V-FN, 16V, 560uF, 105°C, 2000h, 8x10.2mm, ripple 600mArms, 0.16Ohm
A+ EEH-ZS1E561V (PAN)
 
 
A+ EEH-ZS1E561P (PAN)
 
A+ EEHZK1E561UP (PAN)
 
в ленте 510 шт
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 25V, 20% +Tol, 20% -Tol, 560uF, Surface Mount, 4141
A+ EEHZK1E561UV (PAN)
 
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 25V, 20% +Tol, 20% -Tol, 560uF, Surface Mount, 4141
A+ EEH-ZU1E561P (PAN)
 
 
A+ EEH-ZU1E561V (PAN)
 
 
A+ EEHZS1E561P (PAN)
 
250 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 25V, 20% +Tol, 20% -Tol, 560uF, Surface Mount, 4141
A+ EEHZS1E561V (PAN)
 
250 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 25V, 20% +Tol, 20% -Tol, 560uF, Surface Mount, 4141
A+ 16SVPF560MX (PAN)
 
500 шт High Voltage / Large capacitance
A+ 16SVPG560M (PAN)
 
 
Super Low ESR / High ripple current
A+ EEEFK1C561SL (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 560uF, Surface Mount, 3333
A+ EEEFK1C561SP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 560uF, Surface Mount, 3333

Файлы 3

показать свернуть
Conductive Polymer Aluminum Solid Capacitors Surface Mount Type SVF series Features ● High voltage (50 V max.) ● Large capacitance (1000 μF max.) ● 125 ℃ 1000 h ● RoHS compliance, Halogen free Specifications B6 C6 E7 Category temp. range Rated voltage range 16 V to 25 V Nominal cap.range 27 μF to 82 μF 10 μF to 180 μF Capacitance tolerance E12 F10 F12 –55 ℃ to +125 ℃ 16 V to 50 V 16 V 16 V to 50 V 1000 μF 68 μF to 1000 μF 18 μF to 270 μF 39 μF to 560 μF DC leakage current ±20 % (120 Hz / +20 ℃) Please see the attached characteristics list Dissipation factor (tan δ) Please see the attached characteristics list Endurance +125 ℃ 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Dissipation factor (tanδ) DC leakage current Damp heat (Steady state) ≦ 200 % of the initial limit Within the initial limit +60 ℃, 90 % to 95 % RH, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value Dissipation factor (tanδ) DC leakage current Marking ≦ 150 % of the initial limit Within the initial limit (after voltage processing) Dimensions (not to scale) 0.2 max. Polarity marking (−) ⊕ L R. voltage (V) * Depends on the case size. R. capacitance (μF) Size code B6 C6 E7 E12 F10 F12 P H øD Lot No. Series code* W ⊖ C Size code R Unit:mm øD±0.5 +0.1 L -0.4 W±0.2 H±0.2 C±0.2 R P*2 5.0 6.3 8.0 8.0 10.0 10.0 5.9 5.9 6.9 11.9 5.3 6.6 8.3 8.3 10.3 10.3 5.3 6.6 8.3 8.3 10.3 10.3 6.0 7.3 9.0 9.0 11.0 11.0 0.6 to 0.8 1.4 2.1 3.2 3.2 4.6 4.6 10.0*1 12.6 0.6 to 0.8 0.6 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 *1 : ±0.5, *2 : Reference Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Jun-19 PDF
Документация на 16SVF180M 

Series catalog

Дата модификации: 07.12.2021

Размер: 454.1 Кб

7 стр.

Документация на семейство OSCON 

Products catalog

Дата модификации: 28.01.2019

Размер: 1.3 Мб

48 стр.

Conductive Polymer Aluminum Solid Capacitors Surface Mount Type Series : SVF Features ● High voltage (50 V.DC max.) capacitance (1000 μF max.) ● 125 °C 1000 h ● RoHS compliance, Halogen free ● Large Specifications Size code B6 C6 E7 E12 Category temperature range –55 °C to +125 °C Rated voltage range 16 V.DC to 25 V.DC 16 V.DC to 50 V.DC Rated capacitance range 27 μF to 82 μF 10 μF to 180 μF 18 μF to 270 μF 39 μF to 560 μF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list +125 °C, 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 200 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value Damp heat (Steady State) tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking F12 68 μF to 1000 μF Dimensions (not to scale) 0.2 max. W C H fD P – Polarity marking (−) Lot. No. + L R Unit : mm Series R. Capacitance R. Voltage Size code fD±0.5 B6 C6 E7 E12 F12 5.0 6.3 8.0 8.0 10.0 L +0.1 −0.4 5.9 5.9 6.9 11.9 12.6 W±0.2 H±0.2 C±0.2 5.3 6.6 8.3 8.3 10.3 5.3 6.6 8.3 8.3 10.3 6.0 7.3 9.0 9.0 11.0 R P±0.2 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.8 to 1.1 0.8 to 1.1 1.4 2.1 3.2 3.2 4.6 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Oct. 2016 PDF
Документация на серию SVF_OSCON 

CON_CAP_SVF_e.indd

Дата модификации: 26.10.2016

Размер: 51.9 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.