Серия AC-DC сетевых преобразователей HRP-100

MEAN WELL

Общие характеристики

 Раздел AC-DC сетевые преобразователи
Тип стабилизации
Вход
Конструктивное исполнение
Возможности ККМ, дистанционное Вкл/Выкл, 1U профиль, ограничение тока
Типы защиты КЗ, перегрузка, перенапряжение
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
КПД
Размер 97×159×38 мм
Рабочая температура

Документация на серию HRP-100

HRP-100 100W Single Output with PFC Function ■ Features : Universal AC input / Full range Built-in active PFC function High efficiency up to 90% Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Overload / Over voltage Protections: Over temperature (optional) Cooling by free air convection 1U low profile 38mm Built-in remote ON-OFF control No load power consumption<0.5W All using 105℃ long life electrolytic capacitors 5 years warranty series User’s Manual Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION MODEL OUTPUT UL62368-1 BS EN/EN62368-1 TPTC004 IEC62368-1 HRP-100-3.3 HRP-100-5 HRP-100-7.5 HRP-100-12 HRP-100-15 HRP-100-24 HRP-100-36 HRP-100-48 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 36V 48V RATED CURRENT 20A 17A 13.5A 8.5A 7A 4.5A 2.9A 2.2A CURRENT RANGE 0 ~ 20A 0 ~ 17A 0 ~ 13.5A 0 ~ 8.5A 0 ~ 7A 0 ~ 4.5A 0 ~ 2.9A 0 ~ 2.2A RATED POWER 66W 85W 101.3W 102W 105W 108W 104.4W 105.6W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.8V ±2.5% 7.1 ~ 9V ±2.5% 11.4 ~ 13.8V ±1.5% 14.25 ~ 18V ±1.5% 22.8 ~ 28.8V ±1.5% 34.2 ~ 39.6V ±1.5% 45.6 ~ 55.2V ±1.5% 3.1 ~ 3.8V VOLTAGE TOLERANCE Note.3 +2.5,-3.5% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% LOAD REGULATION ±2.0% ±2.0% ±1.5% ±0.8% ±0.8% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 2500ms, 100ms/230VAC HOLD UP TIME (Typ.) 50ms/230VAC 88% 88.5% 89% 90% VOLTAGE RANGE Note.5 85 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz INPUT PROTECTION FUNCTION 120 ~ 370VDC POWER FACTOR (Typ.) PF>0.95/230VAC EFFICIENCY (Typ.) 78% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.1A/115VAC 35A/115VAC LEAKAGE CURRENT <1mA / 240VAC OVERLOAD OVER VOLTAGE 2500ms, 100ms/115VAC at full load 20ms/115VAC at full load PF>0.98/115VAC at full load 83% 84% 87.5% 0.6A/230VAC 65A/230VAC 105 ~ 135% rated output power Protection type : Constant current limiting for Vo=50 ~ 100% of rated voltage, recovers automatically after fault condition is removed 6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 57.6 ~ 67.2V 3.96 ~ 4.62V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE REMOTE CONTROL Shut down o/p voltage, recovers automatically after temperature goes down RC+/RC- : 0 ~ 0.8V= power on ; 4 ~ 10V = power off WORKING TEMP. -40 ~ +60℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH ±0.04%/℃ (0 ~ 50℃) TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION OTHERS NOTE 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes UL62368-1,TUV BS EN/EN62368-1, AS/NZS62368.1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN/ EN61000-4-2,3,4,5,6,8,11, BS EN/ EN55024, BS EN/ EN61000-6-2, heavy industry level,criteria A,EAC TP TC 020 MTBF 295.7K hrs min. DIMENSION 159*97*38mm (L*W*H) PACKING 0.56Kg; 24pcs/15Kg/0.9CUFT MIL-HDBK-217F (25℃) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:HRP-100-SPEC 2021- 09-15 PDF
Документация на HRP-100-7.5 

HRP-100-20210915.cdr

Дата модификации: 28.09.2021

Размер: 99.4 Кб

2 стр.

HRP-100 100W Single Output with PFC Function series ¡½ Features : ¡EUniversal AC input / Full range ¡ Built-in active PFC function E ¡ High efficiency up to 90% E ¡ Withstand 300VAC surge input for 5 seconds E ¡ Protections: Short circuit / Overload / Over voltage E ¡ Protections: Over temperature (optional) E ¡ Cooling by free air convection E ¡ 1U low profile 38mm E ¡ Built-in remote ON-OFF control E ¡ No load power consumption<0.5W E ¡ All using 105¢J long life electrolytic capacitors E ¡ 5 years warranty E .. SPECIFICATION MODEL OUTPUT HRP-100-3.3 HRP-100-5 HRP-100-7.5 HRP-100-12 HRP-100-15 HRP-100-24 HRP-100-36 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 36V 48V RATED CURRENT 20A 17A 13.5A 8.5A 7A 4.5A 2.9A 2.2A CURRENT RANGE 0 ~ 20A 0 ~ 17A 0 ~ 13.5A 0 ~ 8.5A 0 ~ 7A 0 ~ 4.5A 0 ~ 2.9A 0 ~ 2.2A RATED POWER 66W 85W 101.3W 102W 105W 108W 104.4W 105.6W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.8V ¡Ó2.5% 7.1 ~ 9V ¡Ó2.5% 11.4 ~ 13.8V ¡Ó1.5% 14.25 ~ 18V ¡Ó1.5% 22.8 ~ 28.8V ¡Ó1.5% 34.2 ~ 39.6V ¡Ó1.5% 45.6 ~ 55.2V ¡Ó1.5% 3.1 ~ 3.8V VOLTAGE TOLERANCE Note.3 +2.5,-3.5% LINE REGULATION ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.3% ¡Ó0.3% ¡Ó0.2% ¡Ó0.2% ¡Ó0.2% LOAD REGULATION ¡Ó2.0% ¡Ó2.0% ¡Ó1.5% ¡Ó0.8% ¡Ó0.8% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% SETUP, RISE TIME 2500ms, 100ms/230VAC HOLD UP TIME (Typ.) 50ms/230VAC 88% 88.5% 89% 90% PF>0.95/230VAC EFFICIENCY (Typ.) 78% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.2A/115VAC 35A/115VAC LEAKAGE CURRENT <1mA / 240VAC PROTECTION OVER VOLTAGE OVER TEMPERATURE FUNCTION 120 ~ 370VDC POWER FACTOR (Typ.) OVERLOAD 2500ms, 100ms/115VAC at full load 20ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz INPUT HRP-100-48 PF>0.98/115VAC at full load 83% 84% 87.5% 0.6A/230VAC 65A/230VAC 105 ~ 135% rated output power Protection type : Constant current limiting for Vo=50 ~ 100% of rated voltage, recovers automatically after fault condition is removed 6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 57.6 ~ 67.2V 3.96 ~ 4.62V Protection type : Shut down o/p voltage, re-power on to recover 90¢J(3.3V ~ 7.5V) , 85¢J(12V ~ 48V) (TSW1 : detect on heatsink Q101 of power transistor)(optional) REMOTE CONTROL Protection type : Shut down o/p voltage, recovers automatically after temperature goes down RC+/RC- : 0 ~ 0.8V= power on ; 4 ~ 10V = power off WORKING TEMP. -40 ~ +60¢J (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85¢J, 10 ~ 95% RH ¡Ó0.04%/¢J (0 ~ 50¢J) TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION OTHERS NOTE 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25¢J/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria A MTBF 295.7K hrs min. DIMENSION 159*97*38mm (L*W*H) PACKING 0.56Kg; 24pcs/15Kg/0.76CUFT MIL-HDBK-217F (25¢J) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¢J of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:HRP-100-SPEC 2012-07-19 PDF
Документация на серию HRP-100 

HRP-100.cdr Keywords:

Дата модификации: 25.07.2012

Размер: 127.2 Кб

2 стр.

    Товары серии HRP-100

    Наименование i Упаковка P вых Выход U1 I1 Шум
    HRP-100-12 (MW)
     
    		в коробках 6 шт
    HRP-100-15 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 100 Вт; Выход: 15 В; U1: 14.25...18 В; I1: до 7 ... 1 шт
    HRP-100-24 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 100 Вт; Выход: 24 В; U1: 22.8...28.8 В; I1: до 4... 1 шт
    HRP-100-3.3 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 66 Вт; Выход: 3.3 В; U1: 3.1...3.8 В; I1: до 20 ... 1 шт
    HRP-100-36 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 100 Вт; Выход: 36 В; U1: 34.2...39.6 В; I1: до 2... 1 шт
    HRP-100-48 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 100 Вт; Выход: 48 В; U1: 45.6...55.2 В; I1: до 2... 1 шт
    HRP-100-5 (MW)
     
    		1 шт
    HRP-100-7.5 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 100 Вт; Выход: 7.5 В; U1: 7.1...9 В; I1: до 13.5... 1 шт

    HRP-100 публикации

    24 мая 2023
    новость

    Азиатские производители источников питания: что нового? (материалы вебинара)

    16 мая состоялся очередной вебинар из серии регулярных онлайн–встреч, посвященных электронным компонентам азиатских производителей. В этот раз темой встречи было выбрано продуктовое направление «Источники питания». Азиатские компании,... ...читать

    26 апреля 2021
    новость

    Экосистема MEAN WELL. Решения для любых задач электропитания (материалы вебинара)

    Программа показатьсвернуть Приглашаем всех желающих на вебинар, посвященный линейке поставок компании MEAN WELL и ее подходу к производству источников питания – как экосистемы продукции и услуг. Экосистема MEAN WELL позволяет подобрать... ...читать