HRP-100-36

AC/DC преобразователь корпусированный
развернуть ▼ свернуть ▲
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Возможности ККМ, дистанционное Вкл/Выкл, 1U профиль, ограничение тока
Типы защиты КЗ, перегрузка, перенапряжение
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
КПД
Шум
Размер 97×159×38 мм
Рабочая температура
Примечание AC-DC Power Factor Correction Module
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 14

показать свернуть
Тип Наименование Корпус Упаковка i P вых Выход U1 I1 Стабилизация Вход Конструктив Возможности Защита Выходов Управление IP U вх AC U вх DC Коэф. мощн. U изол вх-вых U изол вх-земля U изол вых-земля Применение КПД Шум T раб Примечание Карточка
товара
A+ LRS-100-36 (MW)
 
в коробках 40 шт КЗ, перегрузка, перенапряжение, перегрев AC-DC Regulated Power Supply Module
A+ LM100-22B36 (MORNSUN)
 
в коробках 36 шт КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module
A+ MSP-100-36 (MW)
 
1 шт AC-DC сетевой преобразователь - P вых: 104 Вт; Выход: 36 В; U1: 34.2...39.6 В; I1: до 2... ККМ, дистанционное Вкл/Выкл, 1U профиль КЗ, перегрузка, перенапряжение AC-DC Power Factor Correction Module
A+ HEP-100-36A (MW)
 
1 шт КЗ, перегрузка, перенапряжение, перегрев AC-DC Power Factor Correction Module, 1 Output, 95.4W, Hybrid
A+ LRS-100N2-36 (MW)
 
 
КЗ, перегрузка, перенапряжение
A+ LM100-22B36-C (MORNSUN)
 
 
КЗ, перегрузка, перенапряжение terminal with protective cover
A+ LM100-22B36-Q (MORNSUN)
 
 
КЗ, перегрузка, перенапряжение
A+ LM100-23B36 (MORNSUN)
 
КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module
A+ LM100-23B36-C (MORNSUN)
 
 
КЗ, перегрузка, перенапряжение terminal with protective cover
A+ LM100-23B36-Q (MORNSUN)
 
 
КЗ, перегрузка, перенапряжение
A+ LM100-23B36R2 (MORNSUN)
 
1 шт КЗ, перегрузка, перенапряжение
A+ LM100-20B36 (MORNSUN)
 
КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module, 1 Output, 100.8W, Hybrid
A+ LM100-20B36-C (MORNSUN)
 
 
КЗ, перегрузка, перенапряжение terminal with protective cover
A+ LM100-20B36-Q (MORNSUN)
 
базовая модель, плата покрыта лаком КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module, 1 Output, 100.8W, Hybrid

Файлы 2

показать свернуть
HRP-100 100W Single Output with PFC Function ■ Features : Universal AC input / Full range Built-in active PFC function High efficiency up to 90% Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Overload / Over voltage Protections: Over temperature (optional) Cooling by free air convection 1U low profile 38mm Built-in remote ON-OFF control No load power consumption<0.5W All using 105℃ long life electrolytic capacitors 5 years warranty series User’s Manual Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION MODEL OUTPUT UL62368-1 BS EN/EN62368-1 TPTC004 IEC62368-1 HRP-100-3.3 HRP-100-5 HRP-100-7.5 HRP-100-12 HRP-100-15 HRP-100-24 HRP-100-36 HRP-100-48 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 36V 48V RATED CURRENT 20A 17A 13.5A 8.5A 7A 4.5A 2.9A 2.2A CURRENT RANGE 0 ~ 20A 0 ~ 17A 0 ~ 13.5A 0 ~ 8.5A 0 ~ 7A 0 ~ 4.5A 0 ~ 2.9A 0 ~ 2.2A RATED POWER 66W 85W 101.3W 102W 105W 108W 104.4W 105.6W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.8V ±2.5% 7.1 ~ 9V ±2.5% 11.4 ~ 13.8V ±1.5% 14.25 ~ 18V ±1.5% 22.8 ~ 28.8V ±1.5% 34.2 ~ 39.6V ±1.5% 45.6 ~ 55.2V ±1.5% 3.1 ~ 3.8V VOLTAGE TOLERANCE Note.3 +2.5,-3.5% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% LOAD REGULATION ±2.0% ±2.0% ±1.5% ±0.8% ±0.8% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 2500ms, 100ms/230VAC HOLD UP TIME (Typ.) 50ms/230VAC 88% 88.5% 89% 90% VOLTAGE RANGE Note.5 85 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz INPUT PROTECTION FUNCTION 120 ~ 370VDC POWER FACTOR (Typ.) PF>0.95/230VAC EFFICIENCY (Typ.) 78% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.1A/115VAC 35A/115VAC LEAKAGE CURRENT <1mA / 240VAC OVERLOAD OVER VOLTAGE 2500ms, 100ms/115VAC at full load 20ms/115VAC at full load PF>0.98/115VAC at full load 83% 84% 87.5% 0.6A/230VAC 65A/230VAC 105 ~ 135% rated output power Protection type : Constant current limiting for Vo=50 ~ 100% of rated voltage, recovers automatically after fault condition is removed 6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 57.6 ~ 67.2V 3.96 ~ 4.62V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE REMOTE CONTROL Shut down o/p voltage, recovers automatically after temperature goes down RC+/RC- : 0 ~ 0.8V= power on ; 4 ~ 10V = power off WORKING TEMP. -40 ~ +60℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH ±0.04%/℃ (0 ~ 50℃) TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION OTHERS NOTE 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes UL62368-1,TUV BS EN/EN62368-1, AS/NZS62368.1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN/ EN61000-4-2,3,4,5,6,8,11, BS EN/ EN55024, BS EN/ EN61000-6-2, heavy industry level,criteria A,EAC TP TC 020 MTBF 295.7K hrs min. DIMENSION 159*97*38mm (L*W*H) PACKING 0.56Kg; 24pcs/15Kg/0.9CUFT MIL-HDBK-217F (25℃) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer:For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:HRP-100-SPEC 2021- 09-15 PDF
Документация на HRP-100-7.5 

HRP-100-20210915.cdr

Дата модификации: 28.09.2021

Размер: 99.4 Кб

2 стр.

HRP-100 100W Single Output with PFC Function series ¡½ Features : ¡EUniversal AC input / Full range ¡ Built-in active PFC function E ¡ High efficiency up to 90% E ¡ Withstand 300VAC surge input for 5 seconds E ¡ Protections: Short circuit / Overload / Over voltage E ¡ Protections: Over temperature (optional) E ¡ Cooling by free air convection E ¡ 1U low profile 38mm E ¡ Built-in remote ON-OFF control E ¡ No load power consumption<0.5W E ¡ All using 105¢J long life electrolytic capacitors E ¡ 5 years warranty E .. SPECIFICATION MODEL OUTPUT HRP-100-3.3 HRP-100-5 HRP-100-7.5 HRP-100-12 HRP-100-15 HRP-100-24 HRP-100-36 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 36V 48V RATED CURRENT 20A 17A 13.5A 8.5A 7A 4.5A 2.9A 2.2A CURRENT RANGE 0 ~ 20A 0 ~ 17A 0 ~ 13.5A 0 ~ 8.5A 0 ~ 7A 0 ~ 4.5A 0 ~ 2.9A 0 ~ 2.2A RATED POWER 66W 85W 101.3W 102W 105W 108W 104.4W 105.6W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.8V ¡Ó2.5% 7.1 ~ 9V ¡Ó2.5% 11.4 ~ 13.8V ¡Ó1.5% 14.25 ~ 18V ¡Ó1.5% 22.8 ~ 28.8V ¡Ó1.5% 34.2 ~ 39.6V ¡Ó1.5% 45.6 ~ 55.2V ¡Ó1.5% 3.1 ~ 3.8V VOLTAGE TOLERANCE Note.3 +2.5,-3.5% LINE REGULATION ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.3% ¡Ó0.3% ¡Ó0.2% ¡Ó0.2% ¡Ó0.2% LOAD REGULATION ¡Ó2.0% ¡Ó2.0% ¡Ó1.5% ¡Ó0.8% ¡Ó0.8% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% SETUP, RISE TIME 2500ms, 100ms/230VAC HOLD UP TIME (Typ.) 50ms/230VAC 88% 88.5% 89% 90% PF>0.95/230VAC EFFICIENCY (Typ.) 78% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.2A/115VAC 35A/115VAC LEAKAGE CURRENT <1mA / 240VAC PROTECTION OVER VOLTAGE OVER TEMPERATURE FUNCTION 120 ~ 370VDC POWER FACTOR (Typ.) OVERLOAD 2500ms, 100ms/115VAC at full load 20ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz INPUT HRP-100-48 PF>0.98/115VAC at full load 83% 84% 87.5% 0.6A/230VAC 65A/230VAC 105 ~ 135% rated output power Protection type : Constant current limiting for Vo=50 ~ 100% of rated voltage, recovers automatically after fault condition is removed 6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 57.6 ~ 67.2V 3.96 ~ 4.62V Protection type : Shut down o/p voltage, re-power on to recover 90¢J(3.3V ~ 7.5V) , 85¢J(12V ~ 48V) (TSW1 : detect on heatsink Q101 of power transistor)(optional) REMOTE CONTROL Protection type : Shut down o/p voltage, recovers automatically after temperature goes down RC+/RC- : 0 ~ 0.8V= power on ; 4 ~ 10V = power off WORKING TEMP. -40 ~ +60¢J (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85¢J, 10 ~ 95% RH ¡Ó0.04%/¢J (0 ~ 50¢J) TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION OTHERS NOTE 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25¢J/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria A MTBF 295.7K hrs min. DIMENSION 159*97*38mm (L*W*H) PACKING 0.56Kg; 24pcs/15Kg/0.76CUFT MIL-HDBK-217F (25¢J) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¢J of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:HRP-100-SPEC 2012-07-19 PDF
Документация на серию HRP-100 

HRP-100.cdr Keywords:

Дата модификации: 25.07.2012

Размер: 127.2 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.