Серия AC-DC сетевых преобразователей RD-125

MEAN WELL

Общие характеристики

 Раздел AC-DC сетевые преобразователи
Серия
Тип стабилизации
Вход
Конструктивное исполнение
Возможности
Типы защиты КЗ, перегрузка, перенапряжение
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
Размер 199×98×38 мм
Рабочая температура

Документация на серию RD-125

RD-125 125W Dual Output Switching Power Supply ■ Features : Protections: Short circuit / Overload / Over voltage series User’s Manual Cooling by free air convection LED indicator for power on 100% full load burn-in test All using 105℃ long life electrolytic capacitors Withstand 300VAC surge input for 5 second High operating temperature up to 70℃ Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g SPECIFICATION www. tuv.com ID 2000000000 UL62368-1 MODEL OUTPUT RD-125A CH1 CH2 CH1 CH2 DC VOLTAGE 5V 12V 5V 24V RATED CURRENT 7.7A 7.7A 4.6A 4.6A 0 ~ 10A 0 ~ 10A 0 ~ 5A 120mVp-p 80mVp-p 120mVp-p ±7.0% CURRENT RANGE Note.3 0 ~ 12A RATED POWER Note.6 130.9W VOLTAGE ADJ. RANGE CH1: 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 ±5.0% ±7.0% CH1: 4.75 ~ 5.5V ±5.0% LINE REGULATION Note.4 ±1.0% ±2.0% ±1.0% ±2.0% LOAD REGULATION Note.5 ±3.0% ±4.0% ±3.0% ±4.0% 1200ms, 30ms/115VAC at full load 25ms/230VAC VOLTAGE RANGE 88 ~ 132VAC / 176 ~ 264VAC selected by switch FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 82% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 3A/115VAC 2A/230VAC COLD START 50A/230VAC OVERLOAD OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 7) EMC EMISSION EMC IMMUNITY MTBF NOTE 500ms, 20ms/230VAC HOLD UP TIME (Typ.) PROTECTION OTHERS 133.4W RIPPLE & NOISE (max.) Note.2 80mVp-p LEAKAGE CURRENT TPTC004 RD-125B OUTPUT NUMBER SETUP, RISE TIME INPUT BS EN/EN62368-1 IEC62368-1 30ms/115VAC at full load 248 ~ 373VDC(Withstand 300VAC surge for 5sec. Without damage) 85% <2mA / 240VAC 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75V Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃)on CH1 output 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level, criteria A, EAC TP TC 020 DIMENSION 232.4Khrs min. MIL-HDBK-217F (25℃) 199*98*38mm (L*W*H) PACKING 0.7Kg; 20pcs/15Kg/0.85CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation.(In order to meet tolerance, it is recommended that CH1 load >15% rated current.) 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load. 6. Each output can work within current range. But total output power can't exceed rated output power. 7. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. 9. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:RD-125-SPEC 2021-09-16 PDF
Документация на RD-125B 

RD-125-20210915.cdr

Дата модификации: 28.09.2021

Размер: 144.2 Кб

4 стр.

RD-125 125W Dual Output Switching Power Supply series Features : Protections:Short circuit/Over load/Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test All using 105 long life electrolytic capacitors Withstand 300VAC surge input for 5 second High operating temperature up to 70 Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty SPECIFICATION MODEL OUTPUT INPUT RD-125A RD-125B OUTPUT NUMBER CH1 CH2 CH1 DC VOLTAGE 5V 12V 5V 24V RATED CURRENT 7.7A 7.7A 4.6A 4.6A 0.5 ~ 10A 2 ~ 10A 0.4 ~ 5A CURRENT RANGE Note.6 2 ~ 15A RATED POWER Note.6 130.9W CH2 133.4W RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 80mVp-p VOLTAGE ADJ. RANGE CH1: 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 5.0% CH1: 4.75 ~ 5.5V 5.0% 7.0% 120mVp-p 7.0% LINE REGULATION Note.4 1.0% 2.0% 1.0% 2.0% LOAD REGULATION Note.5 3.0% 4.0% 3.0% 4.0% SETUP, RISE TIME 500ms, 20ms/230VAC HOLD TIME (Typ.) 36ms/230VAC VOLTAGE RANGE 88 ~ 132VAC / 176 ~ 264VAC selected by switch FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 82% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 3A/115VAC 2A/230VAC COLD START 40A/230VAC LEAKAGE CURRENT 1200ms, 30ms/115VAC at full load 30ms/115VAC at full load 248 ~ 373VDC(Withstand 300VAC surge for 5sec. Without damage) 85% <2mA / 240VAC 110 ~ 150% rated output power OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75V Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 )on +5V output 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMC (Note 7) OTHERS HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2) heavy industry level, criteria A DIMENSION PACKING NOTE 232.4Khrs min. MIL-HDBK-217F (25 199*98*38mm (L*W*H) 0.7Kg; 20pcs/15Kg/0.8CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load. 6. Each output can work within current range. But total output power can't exceed rated output power. 7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. File Name:RD-125-SPEC 2005-09-13 PDF
Документация на серию RD-125 

RD-125.cdr

Дата модификации: 01.10.2005

Размер: 1.13 Мб

4 стр.

    Товары серии RD-125

    Наименование i Упаковка P вых Выход U1 I1 КПД Шум
    RD-125-1224 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 133 Вт; Выход: 12 В, 24 В; U1: 11.4...13.2 В; I1... в коробках 20 шт
    RD-125-1248 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 138 Вт; Выход: 12 В, 48 В; U1: 11.4...13.2 В; I1... 1 шт
    RD-125-2412 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 133 Вт; Выход: 24 В, 12 В; U1: 22.8...26.4 В; I1... в коробках 20 шт
    RD-125-2448 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 144 Вт; Выход: 24 В, 48 В; U1: 22.8...26.4 В; I1... 1 шт
    RD-125-4812 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 138 Вт; Выход: 48 В, 12 В; U1: 45.6...52.8 В; I1... 1 шт
    RD-125-4824 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 144 Вт; Выход: 48 В, 24 В; U1: 45.6...52.8 В; I1... 1 шт
    RD-125A (MW)
     
    		AC-DC сетевой преобразователь - P вых: 130 Вт; Выход: 5 В, 12 В; U1: 4.75...5.5 В; I1: ... в коробках 20 шт
    RD-125B (MW)
     
    		AC-DC сетевой преобразователь - P вых: 133 Вт; Выход: 5 В, 24 В; U1: 4.75...5.5 В; I1: ... в коробках 6 шт

    RD-125 публикации

    22 апреля 2025
    статья

    AP8262WSE-A1 – доступная альтернатива популярным ШИМ-контроллерам

    Дмитрий Илларионов (Нижний Новгород) ШИМ–контроллер AP8262WSE–A1 с токовым управлением и фиксированной частотой преобразования от китайской компании Chipown – полный (и бюджетный) качественный аналог популярных изделий семейства... ...читать

    05 ноября 2024
    новость

    Продукция компании YCCFAN для систем вентиляции и охлаждения

    В промышленном, офисном, телекоммуникационном и серверном оборудовании, бытовой технике и медицинских приборах, электронике транспортных средств, системах светодиодного освещения и прочих сферах, где требуется активное охлаждение или вентиляция,... ...читать

    23 марта 2023
    статья

    Диоды и диодные мосты SUNCO – рациональный выбор для любых приложений

    Константин Кузьминов (г. Заполярный) Китайская компания SUNCO занимается полным циклом производства полупроводников. Ее продукция отличается широким разнообразием и при этом соответствует мировым стандартам. Выпрямительные и сигнальные диоды,... ...читать