RS-100-5

MEAN WELL
AC/DC преобразователь: в кожухе; 100 Вт; выход 5В @ 16А; вход: 88...264VAC / 125...373VDC; -20...70°C
развернуть ▼ свернуть ▲
Фотография серии RS-100
Чертеж серии RS-100
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Возможности
Типы защиты КЗ, перегрузка, перенапряжение
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
КПД
Шум
Размер 159×97×38 мм
Рабочая температура
Примечание AC-DC Regulated Power Supply Module, 1 Output, 80W, Hybrid
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 13

показать свернуть
Тип Наименование Корпус Упаковка i P вых Выход U1 I1 Стабилизация Вход Конструктив Возможности Защита Выходов Управление IP U вх AC U вх DC Коэф. мощн. U изол вх-вых U изол вх-земля U изол вых-земля Применение КПД Шум T раб Примечание Карточка
товара
P+ LRS-100-5 (MW)
 
— в коробках 40 шт КЗ, перегрузка, перенапряжение, перегрев AC-DC Regulated Power Supply Module
F~ LM100-20B05 (MORNSUN)
 
— 1 шт КЗ, перегрузка, перенапряжение — — — AC-DC Regulated Power Supply Module, 1 Output, 90W, Hybrid
F~ LM100-22B05 (MORNSUN)
 
— в коробках 36 шт КЗ, перегрузка, перенапряжение — — — — AC-DC Regulated Power Supply Module
A+ HRP-75-5 (MW)
 
— 1 шт AC-DC сетевой преобразователь - P вых: 75 Вт; Выход: 5 В; U1: 4.7...5.8 В; I1: до 15 А;... ККМ, дистанционное Вкл/Выкл, 1U профиль КЗ, перегрузка, перенапряжение AC-DC Power Factor Correction Module, 1 Output, 75W, Hybrid
A+ SP-75-5 (MW)
 
— 1 шт AC-DC сетевой преобразователь - P вых: 75 Вт; Выход: 5 В; U1: 4.75...5.5 В; I1: до 15 А... КЗ, перегрузка, перенапряжение AC-DC Power Factor Correction Module, 1 Output, 75W, Hybrid
A+ MSP-100-5 (MW)
 
— 1 шт AC-DC сетевой преобразователь - P вых: 85 Вт; Выход: 5 В; U1: 4.75...5.8 В; I1: до 17 А... ККМ, дистанционное Вкл/Выкл, 1U профиль КЗ, перегрузка, перенапряжение AC-DC Power Factor Correction Module
A+ RSP-100-5 (MW)
 
— 1 шт AC-DC сетевой преобразователь - P вых: 100 Вт; Выход: 15 В; U1: 14.3...16.5 В; I1: до 6... ККМ, 1U профиль, ограничение тока, дистанционное Вкл/Выкл КЗ, перегрузка, перенапряжение, перегрев AC-DC Power Factor Correction Module
A+ HRP-100-5 (MW)
 
— 1 шт ККМ, дистанционное Вкл/Выкл, 1U профиль, ограничение тока КЗ, перегрузка, перенапряжение AC-DC Power Factor Correction Module
A+ LM100-23B05 (MORNSUN)
 
— КЗ, перегрузка, перенапряжение — — — AC-DC Regulated Power Supply Module
A+ RSP-75-5 (MW)
 
— 1 шт AC-DC сетевой преобразователь - P вых: 75 Вт; Выход: 5 В; U1: 4.75...5.5 В; I1: до 18.7... ККМ, 1U профиль, ограничение тока КЗ, перегрузка, перенапряжение AC-DC Power Factor Correction Module
A+ LMF75-23B05 (MORNSUN)
 
— КЗ, перегрузка, перенапряжение, перегрев — — — — — — AC-DC Power Factor Correction Module
A+ LMF100-20B05 (MORNSUN)
 
— КЗ, перегрузка, перенапряжение, перегрев — — — —
A+ LMF75-20B05 (MORNSUN)
 
— КЗ, перегрузка, перенапряжение, перегрев — —

Файлы 2

показать свернуть
RS-100 100W Single Output Switching Power Supply series User’s Manual ■ Features : Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test All using 105℃ long life electrolytic capacitors Withstand 300VAC surge input for 5 second High operating temperature up to 70℃ Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g SPECIFICATION www. tuv.com ID 2000000000 AS/NZS62368-1 MODEL OUTPUT INPUT RS-100-3.3 BS EN/EN62368-1 IEC62368-1 TPTC004 RS-100-15 RS-100-24 RS-100-48 48V 3.3V 5V 12V 15V 24V RATED CURRENT 20A 16A 8.5A 7A 4.5A 2.3A CURRENT RANGE 0 ~ 20A 0 ~ 16A 0 ~ 8.5A 0 ~ 7A 0 ~ 4.5A 0 ~ 2.3A RATED POWER 66W 80W 102W 105W 108W 110.4W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 120mVp-p 120mVp-p 200mVp-p VOLTAGE ADJ. RANGE 3.2V ~ 3.5V VOLTAGE TOLERANCE Note.3 ±3.0% 4.75 ~ 5.5V ±2.0% 11.4 ~ 13.2V ±1.0% 14.25 ~ 16.5V ±1.0% 22.8 ~ 26.4V ±1.0% 45.6 ~ 52.8V ±1.0% LINE REGULATION Note.4 ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION Note.5 ±2.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% 84% 84% 27.6 ~ 32.4V 55.2 ~ 64.8V SETUP, RISE TIME 500ms, 20ms/230VAC HOLD UP TIME (Typ.) 95ms/230VAC VOLTAGE RANGE 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 74% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 2.5A/115VAC 1.5A/230VAC COLD START 40A/230VAC OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 6) EMC EMISSION 1200ms, 30ms/115VAC at full load 17ms/115VAC at full load 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) 77% 81% 82% <2mA / 240VAC 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368-1, AS/NZS 62368.1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level, criteria A, EAC TP TC 020 MTBF 260.8Khrs min. MIL-HDBK-217F (25℃) 159*97*38mm (L*W*H) 0.6Kg; 24pcs/15.4Kg/0.83CUFT DIMENSION PACKING NOTE UL62368-1 RS-100-12 DC VOLTAGE LEAKAGE CURRENT OTHERS RS-100-5 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. 8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:RS-100-SPEC 2021-09-15 PDF
Документация на RS-100-5 

RS-100-20210915.cdr

Дата модификации: 28.09.2021

Размер: 128.7 Кб

2 стр.

RS-100 100W Single Output Switching Power Supply series Features : Universal AC input / Full range Protections:Short circuit/Over load/Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test All using 105 long life electrolytic capacitors Withstand 300VAC surge input for 5 second High operating temperature up to 70 Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty SPECIFICATION MODEL OUTPUT INPUT RS-100-3.3 RS-100-5 RS-100-12 RS-100-15 RS-100-24 RS-100-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 20A 16A 8.5A 7A 4.5A 2.3A CURRENT RANGE 0 ~ 20A 0 ~ 16A 0 ~ 8.5A 0 ~ 7A 0 ~ 4.5A 0 ~ 2.3A RATED POWER 66W 80W 102W 105W 108W 110.4W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 120mVp-p 120mVp-p 200mVp-p VOLTAGE ADJ. RANGE 3.2V ~ 3.5V VOLTAGE TOLERANCE Note.3 3.0% 4.75 ~ 5.5V 2.0% 11.4 ~ 13.2V 1.0% 14.25 ~ 16.5V 1.0% 22.8 ~ 26.4V 1.0% 45.6 ~ 52.8V 1.0% LINE REGULATION Note.4 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION Note.5 2.0% 1.0% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 500ms, 20ms/230VAC HOLD TIME (Typ.) 100ms/230VAC VOLTAGE RANGE 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 74% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 2.5A/115VAC 1.5A/230VAC COLD START 40A/230VAC LEAKAGE CURRENT 1200ms, 30ms/115VAC at full load 18ms/115VAC at full load 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) 77% 81% 82% 84% 84% 27.6 ~ 32.4V 55.2 ~ 64.8V <2mA / 240VAC 110 ~ 150% rated output power OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE EMC (Note 6) I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2) heavy industry level, criteria A EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE 260.8Khrs min. MIL-HDBK-217F (25 159*97*38mm (L*W*H) 0.6Kg; 24pcs/15.4Kg/0.7CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. File Name:RS-100-SPEC 2005-09-13 PDF
Документация на серию RS-100 

RS-100.cdr

Дата модификации: 01.10.2005

Размер: 383.8 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    AD-55A (MW)