EEEFC0J221P

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 6.3 В x 220 мкФ ±20%, SMD, -40...105 °C, 1000 ч
развернуть ▼ свернуть ▲
Внешний вид серии FC_SMD

Технические характеристики

показать свернуть
Номинальная ёмкость
Допуск ёмкости
Номинальное напряжение
Диаметр корпуса
Высота корпуса
Рабочая температура
Срок службы
Способ монтажа
  Примечания: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
Диаметр x Высота 8×8×8.3 мм
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 22

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Диаметр Высота Траб Наработка Монтаж Примечания Выводы Карточка
товара
P= EEEFC0J221AP (PAN)
 
— 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333 —
A+ JCK0J221M063058 (JB)
 
— 1000 шт — —
A+ 10SVPE220M (PAN)
 
— в ленте 1000 шт Super low ESR / large capacitance —
A+ EEEFK1A221P (PAN)
 
— в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333 —
A+ EEEFP0J221AP (PAN)
 
— в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 2626 —
A+ EEEFP1A221AP (PAN)
 
— 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333 —
A+ EEETC1A221P (PAN)
 
— в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333 —
A+ EEETP1A221AP (PAN)
 
— в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333 —
A+ CA010M0220REH-0607 (YAG)
 

ECAPSMD 220/10V 0607 CA (YAG) 		— в ленте 1000 шт конденсатор алюминиевый SMD 220 мкФ 10 В -40...85 °C 2000 ч Surface Mount Aluminum electrolytic —
A+ JCK1A221M063077 (JB)
 
— 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 2626 —
A+ 6SVPC220MV (PAN)
 
— 1000 шт —
A+ EEFCX0J221R (PAN)
 
— 3500 шт —
A+ EEEFN0J221V (PAN)
 
— 1000 шт V-FN, Vibration proof, 6.3V, 220uF, 105°C, 2000h, 6.3x5.8mm, ripple 240mArms, 0.36Ohm —
A+ EEEFC1A221P (PAN)
 
— 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333 —
A+ EEEFN1A221UV (PAN)
 
— 1000 шт V-FN, Vibration proof, 10V, 220uF, 105°C, 2000h, 6.3x5.8mm, ripple 240mArms, 0.36Ohm —
A+ EEETC1A221V (PAN)
 
— 500 шт
 
 Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333 —
A+ 6SVP220M (PAN)
 
— 500 шт —
A+ 6SVP220MX (PAN)
 
— 1000 шт —
A+ EEFSX0J221ER (PAN)
 
— 3500 шт —
A+ 6SVPA220MAA (PAN)
 
— 1000 шт —
A+ 6SVPC220M (PAN)
 
— в ленте 1000 шт —
A+ 6SVPE220M (PAN)
 
— 1000 шт Super low ESR / large capacitance —

Сопутствующие товары 22

показать свернуть
Наименование Корпус Упаковка Краткое описание Карточка
товара
293D227X9010D2TE3 (VISHAY)
 
TANT73433173X43X31MM в ленте 500 шт Конденсатор танталовый 10 В 220 мкФ ±10% типоразмер SMD_7343-31 TANT73433173X43X31MM  
293D227X0010D2TE3 (VISHAY)
 
TANT73433173X43X31MM в ленте 500 шт Конденсатор танталовый 10 В 220 мкФ ±20% типоразмер SMD_7343-31 TANT73433173X43X31MM  
TR3C227M6R3C0250 (VISHAY)
 
TANT60322860X32X28MM 40 шт Конденсатор танталовый 6.3 В 220 мкФ ±20% типоразмер SMD_6032-28 TANT60322860X32X28MM  
TECAP 220/10V D 10 lowESR (VISHAY)
 
— в ленте 500 шт
 
 — —
593D227X96R3D2TE3 (VISHAY)
 
TANT73433173X43X31MM в ленте 500 шт Конденсатор танталовый 6.3 В 220 мкФ ±10% типоразмер SMD_7343-31 TANT73433173X43X31MM  
593D227X9010E2TE3 (VISHAY)
 
TANT73434373X43X43MM в ленте 400 шт Конденсатор танталовый 10 В 220 мкФ ±10% типоразмер SMD_7343-43 TANT73434373X43X43MM  
593D227X9010D2TE3 (VISHAY)
 

TECAP 220/10V D 10 lowESR (VISHAY) 		TANT73433173X43X31MM в ленте 500 шт Конденсатор танталовый 10 В 220 мкФ ±10% типоразмер SMD_7343-31 TANT73433173X43X31MM  
293D227X96R3D2TE3 (VISHAY)
 
TANT73433173X43X31MM в ленте 500 шт Конденсатор танталовый 6.3 В 220 мкФ ±10% типоразмер SMD_7343-31 TANT73433173X43X31MM  
293D227X96R3C2TE3 (VISHAY)
 
TANT60322860X32X28MM в ленте 500 шт Конденсатор танталовый 6.3 В 220 мкФ ±10% типоразмер SMD_6032-28 TANT60322860X32X28MM  
293D227X9010E2TE3 (VISHAY)
 
TANT73434373X43X43MM в ленте 400 шт Конденсатор танталовый 10 В 220 мкФ ±10% типоразмер SMD_7343-43 TANT73434373X43X43MM  
10TPB220M (PAN)
 
— 2000 шт — —
6TPE220M (PAN)
 
— 3000 шт — —
6TPE220MI (PAN)
 
— в ленте 3000 шт — —
TAJC227K010RNJ (AVX)
 
TANT60322860X32X28MM в ленте 500 шт Cap Tant Solid 220uF 10V C CASE 10% (6 X 3.2 X 2.6mm) SMD 6032-28 T/R TANT60322860X32X28MM  
TPSD227K010R0100 (AVX)
 
TANT73433173X43X31MM в ленте 500 шт Конденсатор танталовый 10 В 220 мкФ ±10% типоразмер SMD_7343-31 TANT73433173X43X31MM  
TPSD227K010R0050 (AVX)
 
TANT73433173X43X31MM в ленте 500 шт Конденсатор танталовый 10 В 220 мкФ ±10% типоразмер SMD_7343-31 TANT73433173X43X31MM  
TAJE227K010RNJ (AVX)
 
TANT73434373X43X43MM в ленте 400 шт Конденсатор танталовый TANT73434373X43X43MM  
TAJD227M010RNJ (AVX)
 
TANT73433173X43X31MM 1 шт Конденсатор танталовый TANT73433173X43X31MM  
TAJD227K006RNJ (AVX)
 
TANT73433173X43X31MM в ленте 500 шт TECAP 220/6.3V D 10 TANT73433173X43X31MM  
TAJC227M006RNJ (AVX)
 
TANT60322860X32X28MM 1 шт TANTAL-CHIP - BAUGRЦSSE C / REEL TANT60322860X32X28MM tantal-chip  
T491D227K010AT (KEM)
 
— в ленте 500 шт Конденсатор танталовый —  
T520D227M010ATE018 (KEM)
 
TANT73433173X43X31MM 1 шт Конденсатор танталовый TANT73433173X43X31MM  

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors Low impedance Surface Mount Type FC series FC HA Features ● ● ● ● ● Endurance : 105 ℃ 1000 h Low impedance (1/2 for HA series) Vibration-proof product (30G guaranteed) is available upon request (ø8 ≦) AEC-Q200 compliant RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current –40 ℃ to +105 ℃ 6.3 V to 50 V 1 μF to 1500 μF ±20 % (120 Hz / +20℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Dissipation factor (tan δ) Please see the attached characteristics list Rated voltage（V） 6.3 10 16 25 35 50 Characteristics Z (-25 ℃) / Z (+20 ℃) 2 2 2 2 2 2 （Impedance ratio at 120 Hz） at low temperature Z (-40 ℃) / Z (+20 ℃) 3 3 3 3 3 3 After applying rated working voltage for 1000 hours at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value Endurance Dissipation factor (tan δ) ≦ 200 % of the initial limit DC leakege current Within the initial limit After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being Shelf life stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Resistance to Capacitance change Within ±10 % of the initial value soldering heat Dissipation factor (tan δ) Within the initial limit DC leakege current Within the initial limit Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 0.70 120 0.75 0.3 max. （P） K B±0.2 Capacitance (μF) Rated voltage code Lot number R.voltage code Unit：V E V H 25 35 50 W L Mark for Lead-Free Pressure Relief（ø10 and larger） Size code øD B 4.0 L 5.4 +0.1 -0.2 +0.1 -0.2 +0.1 -0.2 C 5.0 5.4 D 6.3 5.4 E 8.0 6.2±0.3 8.0 10.2±0.3 F G 10.0 10.2±0.3 （I） Series identification products (Black dot) 6.3 10 16 A±0.2 H øD±0.5 Negative polarity marking (–) j A C 100 k to 1.00 Dimensions Example : 6.3 V 22 μF Marking color : BLACK 22 j FC 10 k ～ 0.95 （I） Marking 1k 0.90 ( )Reference size H I W 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 10 0.90±0.2 4.6 0.70±0.2 12.0 max. 3.5 P Unit：mm A, B K +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 ・The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Dec-19 PDF
Документация на EEEFC0J101P 

Series catalog

Дата модификации: 24.09.2021

Размер: 618.4 Кб

10 стр.

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : FC Type : V Low impedance FC ↑ HA Features ● Endurance : 105 °C 1000 h ● Low impedance (1/2 for HA series) ● Vibration-proof product is available ● RoHS compliant upon request. (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 50 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C) / Z(+20 °C) 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C) / Z(+20 °C) 3 3 3 3 3 3 After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value < 200 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k 100 k to Correction factor 0.70 0.75 0.90 0.95 1.00 22 j FC Capacitance (µF) L Series identification Mark for Lead-Free products (Black dot) Rated voltage code (P) W Pressure Relief (010 and larger) ( ) Reference size (Unit : mm) Lot number R. Voltage 6.3 (V.DC) Code j + (I) Negative polarity marking (–) A±0.2 – H 0D±0.5 0.3 max. K Example : 6.3 V.DC 22 µF Marking color : BLACK (I) Dimensions B±0.2 Marking 10 16 25 35 50 A C E V H Size L A, B H code 0D + 0.1 4.3 5.5 max. B 4.0 5.4 - 0.2 C 5.0 5.4 +- 0.1 5.3 6.5 max. 0.2 D 6.3 5.4 +- 0.1 6.6 7.8 max. 0.2 E 8.0 6.2±0.3 8.3 9.5 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W P K 1.8 2.2 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 2.2 3.1 4.6 0.35+- 0.15 0.20 0.35+- 0.15 0.20 0.35+- 0.15 0.20 0.35+- 0.15 0.20 0.70±0.2 0.70±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 PDF
Документация на серию FC_SMD 

N_AEC_V-FC_E.indd

Дата модификации: 27.03.2019

Размер: 83.3 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MAL202117222E3 (VISHAY)