EEEFC1A471AP

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 10 В x 470 мкФ ±20%, SMD, -40...105 °C, 1000 ч
развернуть ▼ свернуть ▲
Внешний вид серии FC(A)_SMD

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Ток пульсаций низких частот
Диаметр x Высота 10×10×10 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 3939
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 23

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P= EEEFC1A471P (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 3939
A+ EEE1CA471P (PAN)
 
— 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 4141
A+ CA016M0470REG-1010 (YAG)
 
— в ленте 500 шт конденсатор алюминиевый SMD 470 мкФ 16 В -40...85 °C 2000 ч — — — Surface Mount Aluminum electrolytic
A+ CD010M471F10PKKKV00R (SUSCON)
 
— в ленте 500 шт — — — — — —
A+ CD016M471F10PKKKV00R (SUSCON)
 
— в ленте 500 шт — — — — — —
A+ CDS010M471E7DPKKKV00R (SUSCON)
 
— в ленте 1000 шт — — — — — —
A+ CK016M471G10PKKKV00R (SUSCON)
 
— в ленте 500 шт — — — — — —
A+ EEEFK1C471P (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 3333
A+ EEEFP1A471AP (PAN)
 
— 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 3333
A+ EEEFTA471XAP (PAN)
 
— в ленте 900 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 2626
A+ EEETC1A471P (PAN)
 
— 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 4141
A+ EEETC1C471P (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 4141
A+ JCK1C471M080105 (JB)
 
— в ленте 500 шт — — — — — — —
A+ CA010M0470REF-0810 (YAG)
 
— в ленте 500 шт конденсатор алюминиевый SMD 470 мкФ 10 В -40...85 °C 2000 ч — — — Surface Mount Aluminum electrolytic
A+ JCK1A471M080105 (JB)
 
— в ленте 500 шт — — — — — — —
A+ CE010M0470REG-1010 (YAG)
 
— в ленте 500 шт конденсатор алюминиевый SMD 470 мкФ 10 В -40...105 °C 2000 ч — — —
A+ EEE-HC1C471P (PAN)
 
— — — — — —
A+ EEEHA1A471AP (PAN)
 
— 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 4141
A+ EEEHA1A471P (PAN)
 
— 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 4141
A+ EEEHA1A471UP (PAN)
 
— 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 3333
A+ EEETP1A471AP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 4141
A+ EEE-1CA471UP (PAN)
 
— 6 шт — — — — —
A+ EEETP1C471AP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 4141

Сопутствующие товары 22

показать свернуть
Наименование Корпус Упаковка Краткое описание Карточка
товара
CA45-E010K477T (XIANGYEE)
 
TANT73434373X43X43MM в ленте 500 шт
 
 TANT73434373X43X43MM —
CA55-D010477KTE100 (XIANGYEE)
 
— — —
CA55-E010477MTE150 (XIANGYEE)
 
— — —
CA55-E010477MTE100 (XIANGYEE)
 
— — —
CA55-E010477MTE060 (XIANGYEE)
 
— — —
CA55-E010477KTE150 (XIANGYEE)
 
— — —
CA55-E010477KTE100 (XIANGYEE)
 
— — —
CA55-E010477KTE060 (XIANGYEE)
 
— — —
CA55-D010477MTE200 (XIANGYEE)
 
— — —
CA55-D010477MTE100 (XIANGYEE)
 
— — —
CA55-D010477MTE060 (XIANGYEE)
 
— — —
CA55-D010477KTE200 (XIANGYEE)
 
— — —
CA55-D010477KTE060 (XIANGYEE)
 
— — —
CA45L-E016M477TE450 (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45L-E016K477TE450 (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45L-E010M477TE150 (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45L-E010K477TE150 (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-V010M477T (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45-V010K477T (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45-E016M477T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-E016K477T (XIANGYEE)
 
TANT73434373X43X43MM в ленте 15 шт
 
 TANT73434373X43X43MM —
CA45-E010M477T (XIANGYEE)
 
TANT73434373X43X43MM в ленте 500 шт
 
 TANT73434373X43X43MM —

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors Low impedance Surface Mount Type FC series FC High temperature Lead-Free reflow (suffix : A✽) HA Features ● ● ● ● ● Endurance : 105 ℃ 1000 h Low impedance (1/2 for HA series) Vibration-proof product (30G guaranteed) is available upon request (ø8 ≦) AEC-Q200 compliant RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current –40 ℃ to +105 ℃ 6.3 V to 35 V 1 μF to 1500 μF ±20 % (120 Hz / +20℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Dissipation factor (tan δ) Please see the attached characteristics list Rated voltage（V） 6.3 10 16 25 35 Characteristics Z (-25 ℃) / Z (+20 ℃) 2 2 2 2 2 （Impedance ratio at 120 Hz） at low temperature Z (-40 ℃) / Z (+20 ℃) 3 3 3 3 3 After applying rated working voltage for 1000 hours at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value Endurance Dissipation factor (tan δ) ≦ 200 % of the initial limit DC leakege current Within the initial limit After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being Shelf life stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Resistance to Capacitance change Within ±10 % of the initial value soldering heat Dissipation factor (tan δ) Within the initial limit DC leakege current Within the initial limit Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 0.70 120 0.75 0.3 max. （P） K B±0.2 Capacitance (μF) W L Mark for Lead-Free Rated voltage code Pressure Relief（ø10 and larger） Lot number R.voltage code Unit：V E V 25 35 Size code øD L B 4.0 5.4 +0.1 -0.2 +0.1 -0.2 +0.1 -0.2 C 5.0 5.4 D 6.3 5.4 E 8.0 6.2±0.3 F 8.0 10.2±0.3 G 10.0 10.2±0.3 （I） Series identification products (Black dot) 6.3 10 16 A±0.2 H øD±0.5 Negative polarity marking (–) j A C 100 k to 1.00 Dimensions Example : 6.3 V 22 μF Marking color : BLACK 22 j FC 10 k ～ 0.95 （I） Marking 1k 0.90 ( )Reference size H I W 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 10 0.90±0.2 4.6 0.70±0.2 12.0 max. 3.5 P Unit：mm A, B K +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 ・The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Dec-19 PDF
Документация на EEEFC0J102AP 

Series catalog

Дата модификации: 24.09.2021

Размер: 618.4 Кб

10 стр.

Aluminum Electrolytic Capacitors (SMD Type) Low impedance Surface Mount Type Series : FC Type : V High temperature Lead-Free reflow (suffix : A✽) FC ↑ HA Features ● Endurance : 105 °C 1000 h ● Low impedance (1/2 for HA series) ● Vibration-proof product is available ● RoHS compliant upon request. (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 35 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 Z(–25 °C) / Z(+20 °C) 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C) / Z(+20 °C) 3 3 3 3 3 After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value < 200 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 0.70 1k 0.90 100 k to 1.00 22 j FC Capacitance (µF) L Series identification K A±0.2 (P) + (I) Negative polarity marking (–) – H 0D±0.5 0.3 max. W Pressure Relief (010 and larger) Mark for Lead-Free products (Black dot) (I) Dimensions Example : 6.3 V.DC 22 µF Marking color : BLACK ( ) Reference size (Unit : mm) Rated voltage code Lot number R. Voltage (V.DC) Code 10 k 0.95 B±0.2 Marking 120 0.75 6.3 10 16 25 35 j A C E V Size L A, B H code 0D +0.1 4.3 5.5 max. B 4.0 5.4 -0.2 5.3 6.5 max. C 5.0 5.4 +0.1 -0.2 6.6 7.8 max. D 6.3 5.4 +0.1 -0.2 E 8.0 6.2±0.3 8.3 9.5 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W P K 1.8 2.2 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 2.2 3.1 4.6 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.70±0.2 0.70±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 PDF
Документация на серию FC(A)_SMD 

N_AEC_V-FCA_E.indd

Дата модификации: 27.03.2019

Размер: 83.9 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)