EEEFN0J271UL

Конденсатор алюминиевый 6.3 В x 270 мкФ ±20%, SMD, -55...105 °C
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Диаметр корпуса
Высота корпуса
Способ монтажа
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 6.3×6.3×6.6 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 270uF, Surface Mount, 2626
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 7

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P= EEEFK0J271SL (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 270uF, Surface Mount, 2626
P- EEEFK0J271SP (PAN)
 
1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 270uF, Surface Mount, 2626
P- EEEFN0J271UP (PAN)
 
в ленте 1000 шт V-FN, 6.3V, 270uF, 105°C, 2000h, 6.3x5.8mm, ripple 240mArms, 0.36Ohm
A+ 10SVPC270M (PAN)
 
1000 шт
A+ EEEFN0J271UV (PAN)
 
1000 шт V-FN, Vibration proof, 6.3V, 270uF, 105°C, 2000h, 6.3x5.8mm, ripple 240mArms, 0.36Ohm
A+ EEEFK0J271SV (PAN)
 
1000 шт
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 270uF, Surface Mount, 2626
A+ 10SVP270M (PAN)
 
500 шт

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors Surface Mount Type Halogen-free FN series 6.3 V to 50 V 63 V to 100 V : High temperature Lead-Free reflow : Standard Lead-Free reflow Features ● ● ● ● ● Country of origin Endurance:105 ℃ 2000 h Wide voltage range from 6.3 V to 100 V High capacitance : 20 % to 80 % higher than FK series AEC-Q200 compliant RoHS compliant ● Malaysia Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat –55 ℃ to +105 ℃ 6.3 V to 100 V 10 μF to 1800 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached characteristics list Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Z (–25 ℃) / Z (+20 ℃) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z (–40 ℃) / Z (+20 ℃) 3 3 3 3 3 3 3 3 3 Z (–55 ℃) / Z (+20 ℃) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 2000 hours at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value (For suffix "U" : Within ±40 %) Dissipation factor(tan δ) ≦ 200 % of the initial limit Leakage current Within the initial limit After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Dissipation factor(tan δ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Freq.(Hz) 10 to 470 560 to 1800 120 1k 10 k 100 k to 0.65 0.70 0.85 0.90 0.95 0.95 1.00 1.00 Marking Dimensions Example : 6.3 V 220 μF Marking color : BLACK A±0.2 K 0.3 max. Lot number R.voltage code j A C E V 6.3 10 16 25 35 H J K 2A Pressure Relief (ø10 and larger) (P) B±0.2 L W (I) Rated voltage code H Series identification H 220 j FN Capacitance (μF) øD±0.5 Negative polarity marking (–) ()Reference size Unit:V 50 63 80 100 (I) Cap.(μF) Unit:mm Size code D D8 F G øD L A, B 6.3 5.8±0.3 6.6 6.3 7.7±0.3 6.6 8.0 10.2±0.3 8.3 10.0 10.2±0.3 10.3 H 7.8 max. 7.8 max. 10.0 max. 12.0 max. I 2.6 2.6 3.4 3.5 W 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. P K 1.8 0.35 +0.15 ー0.20 1.8 0.35 +0.15 ー0.20 3.1 0.70±0.2 4.6 0.70±0.2 13-Mar-20 PDF
Документация на EEEFN0J681L 

Series catalog

Дата модификации: 24.09.2021

Размер: 536.1 Кб

10 стр.

Aluminum Electrolytic Capacitors Surface Mount Type FN series V type 6.3 V to 50 V 63 V to 100 V ● ● ● ● ● ● NEW : High temperature Lead-Free reflow : Standard Lead-Free reflow Features Endurance : 105 ℃ 2000 h Wide voltage range from 6.3 V to 100 V High capacitance : 20 % to 80 % higher than FK series Vibration-proof product (30G guaranteed) is available upon request (φ6.3 ≦) AEC-Q200 compliant RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current –55 ℃ to +105 ℃ 6.3 V to 100 V 10 μF to 1800 μF ±20 % (120 Hz / +20℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Dissipation factor (tan δ) Please see the attached characteristics list Rated voltage(V) 6.3 10 16 25 35 50 63 80 100 Characteristics Z (-25 ℃) / Z (+20 ℃) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z (-40 ℃) / Z (+20 ℃) 3 3 3 3 3 3 3 3 3 at low temperature Z (-55 ℃) / Z (+20 ℃) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 2000 hours at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. Within ±30 % of the initial value Endurance Capacitance change (For 6.3 V, size B/C, and suffix "U" : Within ±40 %) Dissipation factor (tan δ) ≦ 200 % of the initial limit DC leakege current Within the initial limit After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being Shelf life stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Resistance to Capacitance change Within ±10 % of the initial value soldering heat Dissipation factor (tan δ) Within the initial limit DC leakege current Within the initial limit Frequency correction factor for ripple current Freq.(Hz) Cap.(μF) 10 to 470 560 to 1800 120 1k 10 k 100 k to 0.65 0.70 0.85 0.90 0.95 0.95 1.00 1.00 Dimensions 0.3 max. Lot number R.voltage code j A C E V 6.3 10 16 25 35 (P) W L Rated voltage code Pressure Relief(φ10 and larger) Size code H J K 2A Unit:V 50 63 80 100 B C D D8 F G φD 4.0 5.0 6.3 6.3 8.0 10.0 L 5.8±0.3 5.8±0.3 5.8±0.3 7.7±0.3 10.2±0.3 10.2±0.3 (I) Series identification B±0.2 Capacitance (μF) H φD±0.5 Negative polarity marking (–) 10 j FN A±0.2 K Example : 6.3 V 10 μF Marking color : BLACK A, B 4.3 5.3 6.6 6.6 8.3 10 H 5.5 max. 6.5 max. 7.8 max. 7.8 max. 10.0 max. 12.0 max. (I) Marking ( )Reference size I 1.8 2.2 2.6 2.6 3.4 3.5 W 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P 1.0 1.5 1.8 1.8 3.1 4.6 Unit:mm K 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 ー0.20 0.70±0.2 0.70±0.2 ・The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 31-Jan-20 PDF
Документация на серию FN 

Series catalog

Дата модификации: 27.02.2020

Размер: 706.6 Кб

12 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.